How to Spot Quality Stitching in Secondhand Clothing (A Hands-On Guide From Someone Who Does This Every Day)
Every week I go through dozens of pieces at Revaleur, running my fingers along seams, turning shirts inside out under a good light, stretching pockets gently with my thumbs. After a while you stop thinking about it consciously. The stitching either speaks to you or it doesn't. But it took time to learn that language, and I want to save you that time. Because stitching is genuinely the most honest thing about any garment. A label can be faked, a fabric can look better than it is, a price tag tells you almost nothing. But stitching? Stitching doesn't lie.
This guide is for anyone buying secondhand or vintage clothing and wanting to know, for real, whether a piece is worth the money. I'll take you through exactly what I look at, in the order I look at it, with the specific details the vague "check the seams" advice never gives you.
Start by turning the garment inside out
This is always step one. Always. The inside of a garment is where the maker reveals what they actually think of their own work. When a brand knows that nobody is going to see the interior, that is exactly when shortcuts appear. And when a brand finishes the inside beautifully anyway, that tells you something important about their standards.
Hold the garment up to a decent light source. Natural daylight is best. What you are looking for is a seam that looks almost as neat inside as it does outside. The stitching should be straight, the thread tension consistent, and there should be no raw, fraying edges left exposed without any finishing treatment.
On a well-made piece you will typically see one of three interior finishing approaches, and knowing them is genuinely useful.
The three seam types that signal real quality
Flat felled seams are the gold standard for durability. You will recognise them on the inside of a good Oxford shirt or a classic denim jacket: two rows of stitching visible, with the raw edge of the fabric folded completely inside and stitched flat. There is nothing to fray. These take significantly longer to produce than a basic seam and are a reliable sign of thoughtful construction. On vintage Ralph Lauren or Tommy Hilfiger shirts from the 1990s, flat felled seams on the side seams and sleeves are common, and they are part of why those pieces are still going strong thirty years later.
French seams are the equivalent choice for lighter or more delicate fabrics. The raw edge is enclosed inside a second fold, so when you look at the interior of a fine cotton shirt or a silk blouse, you see a clean, narrow ridge with no exposed threads at all. French seams are associated with dress shirts and lighter wovens. If you find them on a secondhand piece, the maker cared.
Overlocking (also called serging) is the most common interior finish and is not automatically a bad sign. A clean, tight overlock on a well-constructed seam is perfectly fine. The warning sign is when overlocking is the only thing holding the seam together and it looks loose, wide or uneven. On a premium secondhand piece priced at €80 or more, I would expect to see at minimum a neatly overlocked seam. On anything presented as quality tailoring, I want more than that.
Stitches per inch: the number that tells the truth
This is the detail nobody in secondhand fashion talks about, and it is one of the most useful things I know. Stitches per inch, often abbreviated SPI, is simply the number of individual stitches in a one-inch length of seam. The higher the SPI, the more thread is holding the fabric together at any given point, and the stronger and longer-lasting the seam.
Here are the numbers to keep in mind when you are inspecting a piece:
- Dress shirts and lighter wovens: 12 to 14 SPI is the mark of quality construction. Fast fashion often falls at 8 to 10, which is why those shirts start pulling at the seams after a year.
- Outerwear and heavier garments: 8 to 12 SPI is appropriate because the thread and fabric are both heavier. The seam does not need as many stitches to hold.
- Denim: 8 to 10 SPI with a heavy thread is correct for jeans and denim jackets. The thread itself is doing a lot of the structural work.
You do not need a ruler. Hold the seam close to the light and count the stitches over about half an inch, then double the number. If you count fewer than four or five in that half inch on a dress shirt, the seam density is on the low side. It takes thirty seconds and it tells you a lot.
What good stitching actually looks like, in plain terms
Even if you forget every technical term in this guide, you can still spot quality stitching by asking yourself a few simple questions as you inspect a piece.
Is the stitching straight and consistent?
Quality stitching runs in a straight, uninterrupted line. The spacing between each stitch is consistent, the thread tension is even, and there is no wavering or wandering. Wavy or inconsistent stitching usually means the piece was sewn quickly or the sewing machine was not properly set up. Either way, it is a sign of a rushed job.
Does it lie flat?
A well-sewn seam lies completely flat against the fabric. If the fabric puckers or gathers along a seam, the thread tension was wrong or the stitch length was poorly matched to the fabric weight. Puckering is not just cosmetic: it creates stress points that will eventually cause the seam to open or the fabric to distort around it.
Are there loose threads?
A finished garment should have no loose threads anywhere. Thread ends should be knotted or stitched back into the seam. A single loose thread on a well-aged vintage piece is not a disaster, but multiple loose threads on a garment that has not seen obvious heavy use is a red flag for poor quality control at the time of manufacture.
Does the thread colour match?
This is one that most guides skip entirely. On a well-made garment, the thread used for stitching is chosen to match the fabric almost exactly. When you see a seam where the thread colour is noticeably different from the surrounding fabric, there are two possible explanations. First, it could be a deliberate design choice, common on certain workwear or casualwear pieces where contrast stitching is intentional. Second, and more relevant in a secondhand context, it could be a repair. Mismatched thread is one of the clearest signs that a seam has been re-sewn at some point. That is not always a problem, but it is worth knowing before you pay.
The stress point test: where cheap stitching always fails first
Not all seams on a garment carry equal load. There are specific points on every piece of clothing where stress concentrates, and these are the places you should inspect most carefully when evaluating secondhand clothing. I always check these first on any piece I am considering for the shop.
- Pocket corners and pocket openings: Every time someone puts their hand in a pocket, the corner of that opening takes the strain. Quality makers reinforce these points with bar tacks, which are small, dense clusters of stitching that anchor the end of the seam. Run your thumb along the top corners of any pocket. If there is no reinforcement at all, the pocket will eventually tear.
- Collar attachment: Where the collar joins the shirt body is a high-tension seam that takes repeated pulling, stretching and washing. On a quality shirt, this seam is tight, clean and sometimes double-stitched. On a cheap shirt, this is often the first seam to open.
- Underarm and crotch seams: The highest-stress seams on any garment. Turn the piece inside out and inspect these carefully. Quality construction will show reinforced or double-stitched seams here. This is especially important on vintage trousers and jeans, where decades of wear can weaken even good stitching.
- Belt loops: On trousers and jeans, each belt loop should be anchored at both ends with a bar tack or tight reinforcing stitch. Loose belt loops are a sign of corners being cut.
- Button attachment: Turn the garment over and look at how the buttons are sewn on. On a quality piece, the thread wraps firmly around the shank of the button and the stitching on the fabric side looks tight and secure. Many better shirts also include an internal stay button, a small second button on the inside of the fabric, to prevent the outer button from tearing through.
The gentle stress test is worth doing too. Pinch the fabric on either side of a seam between your fingers and pull gently. You are not trying to rip the garment, just applying the kind of tension the seam will face in normal wear. A good seam will not shift, gap or show light through it. If you see the stitching spread apart under light pressure, the seam density is low and the piece will not last well.
Pattern matching at seams: the surest sign of real craft
If you are looking at a striped shirt, a checked overshirt or any patterned fabric, check whether the pattern continues across the seam without interruption. At the side seams of a quality striped shirt, the stripes should align. At the chest pocket of a checked flannel shirt, the check on the pocket should line up with the check on the body beneath it.
Pattern matching requires the cutter to place each piece of fabric individually and carefully, which takes time and wastes material. Brands that bother to do this are signalling something about their standards. Brands that don't are telling you exactly how much they were thinking about craftsmanship versus speed. I look at this on every patterned piece I handle, and when the patterns match beautifully on a vintage piece, it still gives me a small moment of satisfaction. It is a mark of real care.
This is particularly worth checking on vintage Ralph Lauren Oxford shirts and flannel shirts, where pattern-matched yokes and pockets were standard on the better lines and are a good indicator of which tier of the range a piece came from.
Buttonholes: a surprisingly honest quality signal
Open and close every buttonhole on the garment. A quality buttonhole is tightly stitched all the way around with a clean, finished opening. The thread should be dense at the edges, the opening should be cut cleanly without fraying, and the keyhole end (the small round end of the hole on button-front shirts) should be neatly reinforced. Ragged or uneven buttonholes are a weak point that tends to worsen with washing.
On vintage Lacoste polo shirts, for example, the buttonhole stitching is characteristically dense and clean. It is one of the small details that separates an original from a later lower-quality production run, and from outright fakes. If you want to go deeper on spotting authentic embroidered logos on pieces like these, I have written a full guide on how to spot fake embroidered logos on vintage jackets that covers some of the same principles.
What the lining tells you
On any lined garment, whether a blazer, a winter jacket or a heavier coat, pull the lining gently away from the shell and look at what is behind it. A quality lining is fully and neatly attached, with its own clean seams and no raw edges poking out. The lining seams should be as tidy as the outer seams.
A floating or partially detached lining is a warning sign. It either means the garment was not well made to begin with, or that something has pulled loose over time. Either way, check carefully whether the lining seams themselves are intact, because re-lining a jacket properly costs real money and that should factor into what you are willing to pay.
The lining fabric itself is also informative. Silk, acetate, or quality cupro lining in a blazer or coat is a sign of original quality construction. A thin, scratchy polyester lining that feels cheap is usually a signal that corners were cut on the whole piece, not just the lining. If you want a detailed breakdown of how to assess quality on a heavier garment, my guide on how to spot quality in a secondhand wool coat goes deep on this.
Red flags: when to put the piece back on the rail
To pull everything together, here is what I am looking for that tells me a piece is not worth buying regardless of the brand name on the label.
- Wavy, uneven or puckered seams that have never been pressed flat
- Multiple loose or fraying threads without obvious explanation
- Seam allowances that are very narrow (under about 1 cm), leaving little margin if the seam ever needs repair
- Overlocking that is loose, wide or already partially unravelled
- Stress points with no reinforcement at all, particularly pocket corners
- Mismatched thread that suggests rushed repairs
- Buttonholes that are fraying at the edges
- Pattern misalignment on stripes or checks at the side seams
- A lining that is partially detached or has visible raw edges behind it
None of these individually is an automatic disqualifier, but more than one on the same piece, and I am usually putting it back.
A quick note on price and what good construction is worth
When I price pieces at Revaleur, the stitching is part of what I am pricing. A vintage Ralph Lauren Oxford shirt from the early 1990s with flat felled seams, pattern-matched checks and bar tacked pockets will typically sit at €45 to €75 depending on condition and size. A similar-looking shirt from a few years later in the same brand's range, without those construction details, might go for €25 to €35. The difference is real. A piece that is built well will outlast a piece that is built quickly by many years, and in terms of cost per wear that matters enormously.
When you are looking at secondhand designer pieces at prices above €100, the stitching should be near-perfect. If it is not, either the piece was not as premium as the label suggests, or it has been through significant repairs. Both of those things are worth knowing before you hand over the money.
Frequently asked questions
How many stitches per inch should quality secondhand clothing have?
For dress shirts and lighter woven garments, look for 12 to 14 stitches per inch (SPI). For outerwear and heavier garments, 8 to 12 SPI is appropriate because the thread and fabric are heavier. For denim, 8 to 10 SPI with a sturdy thread is correct. Fast fashion pieces typically fall at 8 to 10 SPI on shirts, which is part of why those seams pull apart quickly. You do not need any tools to estimate this: hold the seam close to a light, count the stitches over half an inch and double the number.
What is the difference between a French seam and a flat felled seam, and which is better?
Both are signs of quality construction, but they suit different garments. A flat felled seam folds the raw edge completely inside and stitches it flat, creating two visible stitch rows on both faces of the fabric. It is exceptionally durable and is used on shirts, denim and workwear. A French seam encloses the raw edge inside a second fold, leaving a clean, smooth finish on both sides with no exposed thread. It is used on lighter and more delicate fabrics where adding bulk would be a problem. Finding either one in a secondhand piece means the maker invested real time in construction. Neither is objectively better: they serve different purposes.
What are bar tacks and why do they matter on secondhand clothing?
Bar tacks are small, densely stitched reinforcements placed at high-stress points on a garment, most commonly at the corners of pocket openings, the ends of belt loops, and the base of zip sliders. They are there to stop seams from tearing under repeated use. On a quality secondhand piece you should be able to feel them as a slightly thicker, denser area of stitching at these corners. Their absence at pocket corners or belt loop ends is a sign that the original construction was not particularly thorough, and those points are likely to be the first to fail.
How can I tell if stitching on a secondhand garment is a repair rather than original construction?
The clearest sign is thread colour. Original stitching is matched carefully to the fabric, while a repair is often done in a slightly different shade because the repairer is working with what they have available. You may also notice a change in stitch length or density along part of a seam, or small holes from the original stitching still visible alongside the new thread. None of this is necessarily a reason to walk away, but it is worth factoring into the price you are willing to pay, since a repair can mask underlying damage to the fabric itself.
Does pattern matching at seams really matter when buying secondhand clothing?
Yes, and it is one of the fastest ways to identify whether a piece was made with real care. On striped, checked or any patterned fabric, the pattern should continue unbroken across the seam. Achieving this requires individual cutting of each fabric panel, which takes time and wastes material, so brands that do it are signalling a genuine commitment to quality. If the stripes on a shirt are noticeably misaligned at the side seams, that is not a sign of age or wear: it means the piece was cut quickly from the beginning. It will not affect how long the stitching lasts, but it does tell you something about the overall standard of manufacture.
Is overlocking always a sign of poor quality in secondhand clothing?
No. Overlocking is a standard seam finishing technique and is used widely, including on perfectly good quality garments. The issue is not overlocking itself but how it is used. A tight, clean overlock on a well-constructed seam is fine. The warning sign is loose, wide or unravelling overlocking, or when overlocking is the only method holding the seam together on a piece that is presented as premium quality tailoring. On a shirt or jacket priced at €80 or above in the secondhand market, you should expect more than bare overlocking on the interior seams.
Stitching is a quiet thing. Most people never look at it. But once you start, you cannot stop, and you start to see quality in an entirely different way. It shifts you from buying names to buying construction, which is a genuinely better way to shop, secondhand or otherwise.
If you want to put this into practice, take a look at the pieces we have on Revaleur. Every item goes through exactly this kind of inspection before it goes live, so you can trust what you are getting.